For details, see “Outputting an Optical Fiber Signal.”. Outputs an SDI signal converted to optical format when an SFP+ module (option) is connected. You can select whether to reset the network connection settings only or all settings using SETUP switch 1. Do not insert or remove the Micro SD card when the Phantom 3 Standard is turned on. We recommend using a UHS-1 or Class 6 Micro SD card to minimize delay when reading or writing high resolution image files. Press for at least 5 seconds using the tip of a pen or similar device to reset the settings of the unit to the factory default values. The Phantom 3 Standard comes with an 8 GB Micro SD card, but also supports Micro SD cards with a capacity of up to 64 GB. For details, see “Connecting a Tally Signal”. Use to connect a tally signal from an external device. For details about attaching the HDMI cable retaining plate, see “Connecting Cables.”. To prevent the HDMI cable from being removed, attach the supplied HDMI cable retaining plate using the supplied mounting screw (M2.6×6), and attach the HDMI cable using a commercially available cable tie or band. HDMI cable retaining plate mounting screw For details, see “HDMI connector (Type A connector)” in “Connecting External Monitors and Recording Devices.”. Outputs the video from the unit as an HDMI signal. Two configurable analog inputs accept most standard analog video formats. 
For details, see “Locking the Timecode to Other Devices.”.Input an external reference timecode signal.
If connected without such protection, security issues may occur. When connecting this product to the Internet, connect via a system that provides a protection function, such as a router or firewall.
0 kommentar(er)
